If you haven’t been following the other posts in my series, I explain what a slicer program is in this post: https://www.nitrospaz.com/my-tech-blog/what-is-cad-cam-slicer-and-g-code The slicer program I chose to use for my workflow is Ultimaker Cura (version 5.0.0 or higher). I chose this one because it has:
I was trying to keep my workflow from idea to physical product to a minimum number of steps. So far, my overall process has about 8 major steps and adding more programs and steps to this flow would be sub optimal. In another post I will go into some of the optimizations that can be done (and problems that I still have) for the model in this slicer stage that have a large impact on the final product. Stay tuned and thanks for reading, I hope you found this useful!
0 Comments
Your comment will be posted after it is approved.
Leave a Reply. |
AuthorWalker Crystal Archives
December 2022
Categories |