If you haven’t been following the other posts in my series, I explain what a slicer program is in this post: https://www.nitrospaz.com/my-tech-blog/what-is-cad-cam-slicer-and-g-code
The slicer program I chose to use for my workflow is Ultimaker Cura (version 5.0.0 or higher). I chose this one because it has:
0 Comments
What is the cost? Money, Time, privacy.This is not an all-inclusive list but are some of the major players out there:
Descriptions of names. This is a general overview of what's involved. There are a few ways to go about taking an idea to a physical object with a 3D printer... I chose to use a CAD (Computer-aided design) program and a 'Slicer' program, for now. A slicer program takes
|
AuthorWalker Crystal Archives
December 2022
Categories |